To use AISLER with Altium Designer you will need to export your project as a Gerber-Package. Please make sure you zip your Gerber-Files.
Don't go below these design rules to get optimal results with AISLER's production.
To properly export Gerber Files with Altium for use with AISLER, you will have to setup your NC Drill files and your Gerber setup as displayed in the screenshots below:
Please navigate to File » Fabrication Outputs » NC Drill Files to setup NC Drill Files.
Please navigate to File » Fabrication Outputs » Gerber Files to setup Gerber Export.
Setup Drill Drawing:
Note: In this screen the Film size and Aperture Matching Tolerances are project specific, so please add the project's relevant settings here.
|Gerber Layer Name||Layer|
|project_name.toppaste.ger||Top Paste (Stencil)|
|project_name.bottompaste.ger||Bottom Paste (Stencil)|
|project_name.internalplane1.ger||Internal plane 1|
|project_name.internalplane2.ger||Internal plane 2|
Please note: Altium is known to generate a lot of other stuff in the output files, please ensure to only include the ones relevant and named above, otherwise our import will get confused. If you have sanitized the output files, upload them as a zip file.