This page tells you how to layout your board so that it can be produced by Fritzing Fab powered by AISLER. These are really just "best practice" suggestions -- if you're an advanced user, [[skip to the next step|use-aisler-with/Fritzing/Prepare-your-project-for-the-Fab]].
Pro Tip: Prepare multi-board sketches
Once you have created your circuit in Fritzing, go to "PCB" view to lay it out. If you are not familiar with this process, check out our tutorial pages. Make sure you have the latest version of Fritzing installed to reduce potential problems.
The larger the board, the more it costs. Moving some parts around could save you real money. Keep it tight, but make sure you leave some space around the edges.
If you have a simple layout, try the auto-routing feature (not recommended) by clicking the symbol on the bottom toolbar. If the auto-router says »Routing completed«, go to the next step. If it doesn't, route the remaining traces by hand. Checkout the Fritzing Docs for more Information about the pcb-view and routing.
Check if the traces are thick enough. Some parts like motors, relays, batteries, strong lights will need »thick« or »extra thick« traces. Rule: A big and short trace is better than a long and thin one. You can also type in a custom trace width.
Sometimes, the auto-router produces strange traces. You can optimize them manually by moving or even removing bendpoints (double-click or right-click a bendpoint).
Next step: Prepare your project for the fab